IP350UHD-RX
IP Multicast HDMI2.0 Video Receiver with Dante®
The Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb managed network.
Featuring full interoperability with the IP300UHD product line, the IP350UHD-RX is an industry leading Dante enabled 4K HDCP 2.2 HDMI receiver that, using visually lossless compression technology, delivers 18Gbps HDMI, Dante & AES67 audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fiber SFP network interface.
The IP350UHD-RX can support both video and Dante audio distribution from a single network. A second RJ45 connection allows for the Dante audio network interface to be segregated from the video over IP network if required.
With a full 18Gbps HDMI scaling chipset on-board, the HDMI output can be adjusted to lower resolutions where legacy displays are required in the same system as full 4K. The scaling capabilities of this unit also allow for videowalls to be created where needed.
The unit can be powered via PoE from the network switch, or locally should the switch not support PoE.
With multiple configuration options available, the flexibility of the Blustream Multicast video over IP solution makes this platform ideal for multiple installation types.
• Advanced 4K HDMI 2.0 video over 1Gb managed network supporting 18Gbps HDMI signals
• Virtually unlimited system size
• Extends HDMI up to a distance of 100m over a single CAT cable
• SFP port for signal distribution over fiber
• Supports up to 4K UHD 60Hz 4:4:4
• Supports HDR including Dolby Vision LLM
• Supports all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
• Extends HDMI and Dante up to a distance of 100m over a single CAT cable
• Dual RJ45 network ports configurable for independent or combined HDMI and Dante signal distribution
• SFP port for independent or combined HDMI and Dante signal distribution over a single fiber cable
• Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video
• PoE (Power over Ethernet) to power Blustream unit from PoE switch
• HDCP 2.2 compliant with full 18Gbps scaling capabilities for inclusion of non-4K / legacy displays whilst distributing 4K to other parts of the system
• Analog L/R audio output supports both balanced and unbalanced audio signals
• Optical (S/PDIF) input for 2ch optical audio return that can be fed into Dante network
• OLED front panel display for advanced system information and manual configuration
• Optional 24V power supply (should Ethernet switch not support PoE)
• Compatible with Blustream IP300UHD-TX and IP350UHD-TX/RX products
• Features 4 operational modes:
- Matrix distribution (requires 1Gb network switch)
- Video wall (requires 1Gb network switch)
- One-to-one HDMI extender (no network switch required)
- One-to-many HDMI extender (no network switch required)
*Compatible IP Controllers: ACM210
• Video Input: 1 x LAN RJ45 connector, 1 x SFP connector
• Video Output: 1 x HDMI Type A, female, 1 x LAN RJ45 connector
• Audio Input: 1 x 5-pin Phoenix connector
• Audio Output: 1 x 5-pin Optical (S/PDIF) connector
• Dante Port: 1 x LAN RJ45 connector (LAN2)
• Fiber Port: 1 x SFP connector (fiber module not supplied)
• RS-232 Serial Port: 1 x 3-Pin Phoenix connector
• USB/KVM Port: 1 x USB2.0-type B for KVM
• IR Input: 1 x 3.5mm stereo jack
• IR Output: 1 x 3.5mm mono jack
• Dimensions (W x D x H ): 190mm x 128mm x 25mm
• Packaging Dimensions (W x D x H): 260mm x 180mm x 55m
• Unit Weight: 0.75kg
• Power Consumption: 12W (max)
• Shipping Weight: 1kg
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature : -4°F to 140°F (-20°C to 60°C)
• Power Supply: Class 3 IEEE 802.3af POE PD or 24V 1A DC PSU
1 x IP350UHD-RX
1 x IRR Receiver
1 x IRE1 Emitter
1 x Audio 5-pin Phoenix Connector
1 x Serial 3-pin Phoenix Connector
1 x Mounting Kit
Product Images
We have regional headquarters located in Melbourne, Australia, the UK and the USA. From all locations our experienced product managers are on hand to provide real time sales and technical support to our customers. Coupled with state of the art testing and training facilities this ensures our products can be installed in any AV environment with unrivalled confidence. We proudly deliver 24 hour technical support via phone, email and live chat to our sales partners throughout the world.
United Kingdom
Blustream UK
The Service Station,
Melton Road,
Hickling Pastures,
Nottinghamshire,
LE14 3QG, UK
+44(0) 115 8247000
European Union
Blustream SL
Calle Oro 45,
Nave 10,
28770,
Colmenar Viejo,
Madrid, Spain+34 911 232 072
USA
Blustream USA
5775 12th Avenue East,
Suite 180,
Shakopee,
MN 55379
+1 (952) 333-8411
Australia/Oceana
Blustream Australia
26 Lionel Road,
Mt. Waverley,
Victoria 3149,
Australia,
+61 3 8691 1999
Related Products
ACM210
Advanced Control Module
IP350UHD-TX
IP Multicast HDMI2.0 Video Transmitter with Dante®
IP300UHD-TX
IP Multicast HDMI2.0 Video Transmitter
IP300UHD-RX
IP Multicast HDMI2.0 Video Receiver
Video