================================================================= NPA20ARC Help Info FW Version:MCU_Main V1.1.0/Web_GUI V1.1.0 ============================= System Information Command ?/HELP Print Help Information STATUS Print System Status And Port Status TEMP Print System Temperature UPTIME Print System Uptime ============================= System Control Command PON Power On, System Run On Normal State POFF Power Off, System Run On Power Save State PWLED FOLLOW ON/OFF ON:Set System Power LED Follow LCD Status OFF:Set System Power LED Not Follow LCD Status, In Power On State, Power LED Always On RESET Reset System Settings To Default (Should Type "Yes" To Confirm, "No" To Discard) RESET ALL Reset System And Network Settings To Default (Should Type "Yes" To Confirm, "No" To Discard) REBOOT Set System Reboot AUTO STB xx Set System Auto Standby Time xx=0:Auto Standby Off xx=[1...120]:Auto Standby Time(mins) STANDBY xx Set System Standby Mode To xx xx=0:Sleep, 1:Standby AMPMODE xxx Set Amp Power To xxx xx=1:PoE+ Type 2 Class 4 (25.5W) xx=2:PoE Class 0 (13W) KEY ON/OFF Set System KEY Control On Or Off LCD ON/OFF/15/30/60 Set LCD Always On Or Auto Turn Off In 15/30/60s IDLED ON/OFF/15/30/60 Set ID LED On Or Auto Turn Off In 15/30/60s In Power On State Or Turn On 15/30/60s TRIG ON/OFF yy Set Trigger On Or Off With Trigger Level:yy yy=0:Low Level(0V) Mute Output yy=1:High Level(5 - 12V) Mute Output RSB xx Set RS232 Baud Rate To xx bps xx=[1...3]:1:4800, 2:9600, 3:19200 xx=[4...6]:4:38400, 5:57600, 6:115200 VOL+yy Increase System Volume yy=[1...100]:Steps yy Can Be Empty (1 Step) VOL-yy Decrease System Volume yy=[1...100]:Steps yy Can Be Empty (1 Step) VOL xx Set System Volume Value To xx xx=[0...100]:Volume Value MUTE ON/OFF Set Mute On Or Off MASTER xx Set Output Master Includes xx xx=[0...3]:0:All, 1:AMP Only, 2:LINE Only, 3:None ============================= Input Control Command IN xx GAIN yy Set Input:xx Gain To yy xx=[0...2]:0:All, 1:LINE, 2:HDMI ARC yy=[-24...24]:Input Gain Value For LINE yy=[-12...12]:Input Gain Value For HDMI ARC IN xx GAIN+ Increase Input:xx Gain xx=[0...2]:0:All, 1:LINE, 2:HDMI ARC IN xx GAIN- Decrease Input:xx Gain xx=[0...2]:0:All, 1:LINE, 2:HDMI ARC IN xx CEC VOL STEPS yy Set CEC Vol Steps xx=[0...1]:0:ALL,1:ARC yy=[1...10]:CEC Steps CEC ON/OFF Set CEC Volume Control On Or Off ============================= Output Control Command OUT xx FR yy Set Output:xx From Input:yy xx=[00-01] For All Output. (Not Support Single Output Switching) yy=[0...2]:0:Default(LINE), 1:LINE, 2:HDMI ARC OUT xx VOL yy Set Output:xx Volume To yy xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[0...100]:Volume Value OUT xx VOL+yy Increase Output:xx Volume xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[1...100]:Steps yy Can Be Empty (1 Step) OUT xx VOL-yy Decrease Output:xx Volume xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[1...100]:Steps yy Can Be Empty (1 Step) OUT xx MUTE ON/OFF Set Output:xx Mute On Or Off xx=[0...2]:0:ALL, 1:AMP, 2:LINE OUT xx GAIN yy Set Output:xx Gain To yy xx=[0...1]:0:All, 1:LINE yy=[0...15]:0:+20dBu, 1:+18dBu, 2:+15dBu, 3:+12dBu 4:+9dBu, 5:+6dBu, 6:+4dBu, 7:0dBu 8:0dBV, 9:-3dBV, 10:-6dBV, 11:-10dBV 12:-14dBV, 13:-20dBV, 14:-24dBV, 15:-28dBV OUT xx DLYT yy Set Output:xx Delay Time To yy(ms) xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[0...100]:Delay Time, Millisecond OUT xx REVB ON/OFF Set Output:xx Reverb On Or Off xx=[0...2]:0:ALL, 1:AMP, 2:LINE OUT xx PHASE yy INV ON/OFF Set Output:xx L-Invert Or R-Invert On Or Off xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[0,1]:0:LEFT, 1:RIGHT OUT xx MIX yy Set Output:xx Mix yy xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[1,2]:1:STEREO, 2:LEFT-CH yy=[3,4]:3:RIGHT-CH, 4:LEFT-CH And RIGHT-CH OUT xx EQ yy VAL zz Set Output:xx GEQ:yy To zz xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[1...31]:EQ Index zz=[-10...3]:EQ Value OUT xx EQ PRESET yy Set Output:xx GEQ To Preset:yy xx=[0...2]:0:ALL, 1:AMP, 2:LINE yy=[1...3]:1:Flat, 2:Custom1, 3:Custom2 ============================= Network Control Command NET DHCP ON/OFF Set Auto IP(DHCP) On Or Off NET IP xxx.xxx.xxx.xxx Set IP Address NET GW xxx.xxx.xxx.xxx Set Gateway Address NET SM xxx.xxx.xxx.xxx Set Subnet Mask Address NET TCPPORT ON/OFF Set TCP/IP On Or Off NET TCPPORT xxxx Set TCP/IP Port NET TN ON/OFF Set Telnet On Or Off NET TN xxxx Set Telnet Port NET RB Network Reboot And Apply New Config!!! NET DNS xxxx Set DNS Domain Name To xxxx ================================================================= NPA20ARC>