DA11XLR Terminal Control System
FW Version : V1.1.0
Type "HELP" For More Information
=================================

DA11XLR>??

=================================================================
      DA11XLR Help Info
      FW Version:MCU_Main V1.1.0/MCU_Sub V2.0.0/DEP_SDK V1.3.1.1_20240312

============================= System Information Command
?/HELP                        Print Help Information
STATUS                        Print System Status And Port Status
UPTIME                        Print System Uptime
TEMP                          Print System Temperature
============================= System Control Command
RESET                         Reset System Settings To Default
                              (Should Type "Yes" To Confirm, "No" To Discard)
RESET ALL                     Reset System And Network Settings To Default
                              (Should Type "Yes" To Confirm, "No" To Discard)
REBOOT                        Set System Reboot
PHTLED ON/OFF/15/30/60        Set Phantom Power LED On Or Auto Turn Off In 15/30                                                                                                             /60s
============================= Input And Output Port Connect Command
IN xx PHT ON/OFF              Set Input:xx Phantom Power On Or Off
                              xx=[0...2]:0:All Channels,1:CH1,2:CH2
IN xx SENS yy                 Set Input:xx Sensitivity To yy
                              xx=[0...2]:0:All Channels,1:CH1,2:CH2
                              yy=[0...15]:Sensitivity Levels
                              yy=0:+24dBu
                              yy=1:+21dBu
                              yy=2:+18dBu
                              yy=3:+15dBu
                              yy=4:+12dBu
                              yy=5:+9dBu
                              yy=6:+6dBu
                              yy=7:+4dBu
                              yy=8:0dBu
                              yy=9:0dBV
                              yy=10:-3dBV
                              yy=11:-6dBV
                              yy=12:-10dBV
                              yy=13:-14dBV
                              yy=14:-20dBV
                              yy=15:-28dBV
============================= Network Control Command
NET DHCP ON/OFF               Set Auto IP(DHCP) On Or Off
NET IP xxx.xxx.xxx.xxx        Set IP Address
NET GW xxx.xxx.xxx.xxx        Set Gateway Address
NET SM xxx.xxx.xxx.xxx        Set Subnet Mask Address
NET TCPPORT ON/OFF            Set TCP/IP On Or Off
NET TCPPORT xxxx              Set TCP/IP Port
NET TN ON/OFF                 Set Telnet On Or Off
NET TN xxxx                   Set Telnet Port
NET RB                        Network Reboot And Apply New Config!!!
NET DNS xxxx                  Set DNS Domain Name To xxxx
=================================================================